Product Specifications
- Product Name: POP UP CANOPY
- Top Material: Polyester
- Bracket Material: Powder Coated Steel
- Specifications: 10 ft x 10 ft
- Applicable Season: Four Seasons
- Applicable Venue: Beach, Party, Commercial Events, Sports Activities
Parts List
- 1x Folded Frame
- 1x Canopy Top
- 1x Wheeled Carry Bag
- 4x Sandbags / Weight Bags
- 4x Ground Stakes
- 4x Ropes
- 4x Sidewalls (if you purchased a model with walls)
Important Safety Instructions
- Read the instructions carefully and keep them for future reference.
- This product is intended for outdoor and private use only. Pay close attention to all safety notes.
- Do not use the product if any parts are damaged.
- Do not use the product in any way not recommended; otherwise, damages will not be covered by the warranty.
- Failure to comply with safety instructions may lead to personal injury.
- Place the canopy on a stable and level surface.
- Keep away from open flames or flammable materials.
- Be careful to avoid pinching your hands during assembly.
- Do not attempt to assemble in a drunken state, in severe weather, or without assistance.
Setting Up Your Canopy (10x10)
Step 1
Take the frame out of the carry bag and stand it upright.
Step 2
Gently pull the outer legs to partially expand the frame.
Step 3
Attach the four corners of the canopy top to the four corners of the frame using the Velcro straps.
Step 4
Expand the frame and raise it to its final position.
Step 5
Adjust the legs to the desired height.
Step 6
(Optional: For canopy with walls) Install the sidewalls as needed using the Velcro and zippers.
Step 7
Secure the canopy using sandbags, ropes, and ground stakes. Tip: Sandbags can be filled with sand, rocks, or snow. Use a hammer for stakes if necessary.
Taking Down Your Canopy
Step 1
Remove all ground stakes, ropes, and sandbags.
Step 2
(Optional: For canopy with walls) Carefully unzip and unfasten the Velcro on each side to remove the sidewalls. Tip: Do not use excessive force to avoid tearing.
Step 3
Adjust the legs to their lowest position.
Step 4
Gently lift the frame and push it inwards until it is about half-closed.
Step 5
Unfasten the Velcro at the four corners and remove the canopy top. Tip: Do not use excessive force during this step to avoid tearing.
Step 6
Fully collapse the frame.
Step 7
Place the frame back into the wheeled carry bag.